Check the element connectivities for underlying elements 4041 instance part-1-1 and 1548398 instance part-1-1 (sharing the common edge whose end points are nodes 141 instance part-1-1 and 142 instance

element number 55377 of instance P2CULAYER-1***ERROR: Excessive distortion of element number 55383 of instance P2CULAYER-1***ERROR: Excessive distortion of element number 55384 of instance P2CULAYER

d 5388426397 regularize time history data contracting memory to 3420929 d 5388426397 *DEFINE_ELEMENT_DEATH expanding memory to 3421009 d 5388426398 MPP copy of tim vector expanding

-01 1.01 4.5925E-01 0.99 ALE Adv mix ........ 2.4067E-02 0.05 2.4155E-02 0.05 ALE Adv pre ........ 5.7168E-02 0.13 5.7268E-02 0.12 ALE Adv reg1

大佬们，我做XFEM分析的时候出现下列错误：THE DAMAGE MODEL HAS TO BE SPECIFIED FOR ENRICHED ELEMENT 1 INSTANCE SOLID-URIB-1 SINCE THERE IS NO INITIAL CRACK IN THE ENRICHED REGION但是我已经有在interaction crack 模块定义裂纹区域和裂纹了不知道怎么解决

Check the element connectivities for underlying elements 51221 instance fluid1-1 and 65798 instance fluid1-1 (sharing the common edge whose end points are nodes 49233 instance fluid1-1 and 49235 instance

The error conditions are listed with the crack names: Crack-1 - Multiple intersections between crack and an element edge.这是什么原因？哪一步操作错误了吗？重新操作一次还是报错，求大神指点！#ABAQUS#

如图，想用abaqus实现在两个处于同一平面的面上分别施加力矩，用两个参考点分别耦合两个面，但是由于存在共用节点会导致过约束的情况，计算会报错：OVERCONSTRAINT CHECKS: NODE 25 INSTANCE PART-1-1 IS USED MORE THAN ONCE AS A COUPLING NODE IN THE *KINEMATIC COUPLING KEYWORD.